Newsletter
PVshop.eu | EBORX Sp. z o.o. Authorized Phocos Distributor
Sizing the charge controllers in PV off-grid systems (general rules):
- Do not exceed the controller allowed max current and voltage A/V defined as Isc/Voc.
- In PWM controller max allowed voltage results from battery.min.voltage +30V (eg in 12Vdc systems: ~10Vmin.bat + 30V = 40V max).
- In MPPT controller the absolute max allowed voltage is defined in the datasheet.
- The real occuring current and voltage of the panel depends on temperature coefficient of the panel. Calculate additional 25% (A/V) which may occur under low temperature, as safety buffer (eg if panel Isc 8A, calculate +25% = 10A which may occur).
- To choose the correct battery capacity, multiply the controller nominal current x10 (eg for an 10A controller choose 100Ah battery).
- Always check the controller's datasheet and manual for individual parameters.
Phocos ECO-N-10
System Voltage: 12/24V
Charge current: 10A
Max. Input Voltage: 30/50V
Max. Input Power: 175/350W
Low voltage disconnect: yes
Grounding: negative
Charging method: PWM
Availability: in stock
Minimum order: no limit
Phocos CIS10-2L Industrial Solar Charge Controller IP68, dual load, timer (12/24V)
Waterproof (IP68) PV solar charge controller
Loads: dual loads (not dimmable)
Nominal voltage: 12/24V (autodetection)
Panel max current: 10A (Isc)
Panel max voltage: 42/52V (Voc) in 12/24V systems
Charging method: PWM 4-stage
Monitoring: LED's, positive-grounding possible (on plus line)
Function: protection against overcharge- and deep-discharge of battery, programmable for two loads (2L series)
SALE OFF
Availability: in stock
Minimum order: no limit
Phocos CXNT | External Temperature Sensor for CXN
Temperature sensor for CXN
Simple assembly
Wide temperature range
SALE OFF
Availability: in stock
Minimum order: no limit
Phocos CML20 Solar Charge Controller (12/24V)
Solar charge controller for 12/24V PV solar systems
Available models: Phocos CML 10/15/20
Nominal voltage: 12/24V (autodetection)
Panel max current: 10/15/20A (Isc)
Panel max voltage: 30/50V (Voc) in 12/24V systems
Charging method: PWM 3-stage
Monitoring: three LED
Function: protection against overcharge- and deep-discharge of battery
SALE OFF
Availability: in stock
Minimum order: no limit
Phocos CMMsolid | Remote Display for the CMLsolid Charge Controller
Displays panel current, load current, and battery voltage
Large three-digit display
One push button
Three LEDs help indicate which value is displayed by LCD
DIN rail adapter for wall mounting
Availability: in stock
Minimum order: no limit
Phocos CML10 Solar charge controller (12/24V)
Solar charge controller for 12/24V PV solar systems
Nominal voltage: 12/24V (autodetection)
Panel max current: 10A (Isc)
Panel max voltage: 30/50V (Voc) in 12/24V systems
Charging method: PWM 3-stage
Monitoring: three LED
Function: protection against overcharge- and deep-discharge of battery
SALE OFF
Availability: in stock
Minimum order: no limit
Phocos CXM | Remote Display for CXN
Display for CXN series
3-digit LCD Display
Choice of the displayed value
Prepared for DIN rail (35mm)
SALE OFF
Availability: in stock
Minimum order: no limit
Phocos CMM | Phocos meter for CA, CML, CML-NL
Display for CA and CML
3-digit LCD Display
Choice of the displayed value
Prepared for DIN rail
SALE OFF
Availability: in stock
Minimum order: no limit
Phocos ECO-N-10-T
System Voltage: 12/24V
Charge current: 10A
Max. Input Voltage: 30/50V
Max. Input Power: 175/350W
Low voltage disconnect: yes
Grounding: negative
Charging method: PWM
Availability: in stock
Minimum order: no limit
Phocos MXI-IR | PC USB interface, IR for CIS series
Infrared to USB programming accessory for CIS series controllers
Enables individual system settings and parameters
Compatible with all Phocos CIS controller
Enables access to datalogger info (CIS-MPPT only)
Availability: in stock
Minimum order: no limit
Phocos CML-USB-20
System Voltage: 12/24V
Charge current: 20A
Max input voltage: 30/50V
Max input power: 175/350W
Low voltage disconnect: yes
Grounding: positive
Charging method: PWM
Availability: in stock
Minimum order: no limit
Phocos CIS10 Industrial Solar Charge Controller IP68, timer (12/24V)
Waterproof (IP68) PV solar charge controller
Loads: single load (dimmable)
Nominal voltage: 12/24V (autodetection)
Panel max current: 10A (Isc)
Panel max voltage: 42/52V (Voc) in 12/24V systems
Charging method: PWM 4-stage
Monitoring: LED's, positive-grounding possible (on plus line)
Function: protection against overcharge- and deep-discharge of battery, programmable for one load
SALE OFF
Availability: in stock
Minimum order: no limit
Phocos ECO-N-20-T
System Voltage: 12/24V
Charge current: 20A
Max. Input Voltage: 30/50V
Max. Input Power: 350/700W
Low voltage disconnect: yes
Grounding: negative
Charging method: PWM
Availability: in stock
Minimum order: no limit
Phocos CIS-N-20
System Voltage: 12/24V
Charge current: 20A
Max. Input Voltage: 30/50V
Max. Input Power: 350/700W
Low voltage disconnect: yes
Grounding: common negative
Charging method: PWM
Availability: in stock
Minimum order: no limit
Phocos CIS-CU | Phocos Configuration Unit for CIS controllers
Remote controller for individual settings and operation
Compatible with all Phocos CIS controllers
Infrared interface
Availability: in stock
Minimum order: no limit
Phocos CXNup10
System Voltage: 12/24V
Charge current: 10A
Max. Input Voltage: 30/50V
Max. Input Power: 175/350W
Low voltage disconnect: yes
Grounding: negative
Charging method: PWM
Availability: in stock
Minimum order: no limit
Phocos CX20-48V Solar Charge Controller (24/48V)
Nominal voltage: 24/48V (autodetection)
Panel max current: 20A (Isc)
Panel max voltage: 50/95V (Voc) in 24/48V systems
Charging method: PWM 4-stage
Monitoring: LCD-Display
Function: protection against overcharge- and deep-discharge of battery, datalogger (one year)
SALE OFF
Availability: in stock
Minimum order: no limit
Phocos CIS20 Industrial Solar Charge Controller IP68, timer (12/24V)
Waterproof (IP68) PV solar charge controller
Loads: single load (dimmable)
Nominal voltage: 12/24V (autodetection)
Panel max current: 20A (Isc)
Panel max voltage: 42/52V (Voc) in 12/24V systems
Charging method: PWM 4-stage
Monitoring: LED's, positive-grounding possible (on plus line)
Function: protection against overcharge- and deep-discharge of battery, programmable for one load
SALE OFF
Availability: in stock
Minimum order: no limit
Phocos CXNup20
System Voltage: 12/24V
Charge current: 20A
Max. Input Voltage: 30/50V
Max. Input Power: 350/700W
Low voltage disconnect: yes
Grounding: negative
Charging method: PWM
Availability: in stock
Minimum order: no limit
Phocos CIS-N-LED-2800
System Votage: 12/24V
Charge current: 20A
Max. Input Voltage: 30/50V
Max. Input Power: 350/700W
Low voltage disconnect: yes
Grounding: negative
Charging method: PWM
Availability: in stock
Minimum order: no limit
Phocos CIS-N-LED-1400
System Voltage: 12/24V
Charge current: 20A
Max. Input Voltage: 30/50V
Max. Input Power: 350/700W
Low voltage disconnect: yes
Grounding: negative
Charging method: PWM
Availability: in stock
Minimum order: no limit
Phocos CIS-N-LED-1050
System Voltage: 12/24V
Charge current: 20A
Max. Input Voltage: 30/50V
Max. Input Power: 350/700W
Low voltage disconnect: yes
Grounding: common negative
Charging method: PWM
Availability: in stock
Minimum order: no limit
Phocos CIS20-2L Industrial Solar Charge Controller IP68, dual load, timer (12/24V)
Waterproof (IP68) PV solar charge controller
Loads: dual loads (not dimmable)
Nominal voltage: 12/24V (autodetection)
Panel max current: 20A (Isc)
Panel max voltage: 42/52V (Voc) in 12/24V systems
Charging method: PWM 4-stage
Monitoring: LED's, positive-grounding possible (on plus line)
Function: protection against overcharge- and deep-discharge of battery, programmable for two loads (2L series)
SALE OFF
Availability: in stock
Minimum order: no limit
Phocos CXN20 Solar Charge Controller (12/24V)
Solar charge controller for 12/24V negative grounded systems
Nominal voltage: 12/24V (autodetection)
Panel max current: 20A (Isc)
Panel max voltage: 30/50V (Voc) for 12/24V systems
Charging method: PWM 4-stage
Monitoring: LCD-Display
Function: protection against overcharge- and deep-discharge of battery, datalogger (one year), negative grounding (N-series)
SALE OFF
Availability: in stock
Minimum order: no limit
Phocos CXNup20-2B Solar Charge Controller, Negative Grounding, Two Battery Loader (12/24V)
Dual Battery Solar Charge Controller with LCD
Nominal voltage: 12/24V (autodetection)
Max charge current: 20A (Isc)
Panel max voltage: 30/50V (Voc) for 12/24V systems
Charging method: PWM 4-stage
Monitoring: LC-Display
Function: deep-discharge protection of battery, data logger-2 years, external temperature sensor, negative pole grounded
Availability: in stock
Minimum order: no limit
Phocos CXNup40
System Voltage: 12/24V
Charge current: 40A
Max input voltage: 30/50V
Max input power: 700/1050W
Low voltage disconnect: yes
Grounding: negative
Charging method: PWM
Availability: in stock
Minimum order: no limit
Phocos CIS-N-MPPT-85/15
System Voltage: 12/24V
Charge current: 15A
Max. Input Voltage: 85Voc
Max. Input Power: 250/500W
Low voltage disconnect: yes
Grounding: common negative
Charging method: MPPT
Availability: in stock
Minimum order: no limit
Phocos CXN40 Solar Charge Controller (12/24V)
Solar charge controller for 12/24V negative grounded systems
Nominal voltage: 12/24V (autodetection)
Panel max current: 40A (Isc)
Panel max voltage: 30/50V (Voc) for 12/24V systems
Charging method: PWM 4-stage
Monitoring: LCD-Display
Function: protection against overcharge- and deep-discharge of battery, datalogger (one year), negative grounding (N-series)
SALE OFF
Availability: in stock
Minimum order: no limit
Phocos MCU | Modular Central Unit
Modular central unit within Phocos MPM System
Manages all Phocos modular components
Compatible with: MPPT, MPS, MCS, MRD, MXI, MTS
Synchronizes up to 16x MPM components
PC communication via MXI interface (available optionally)
5 years dataloger memory, for each MPM component
Individual system settings via MODCOM (software free available)
SALE OFF
Availability: in stock
Minimum order: no limit
Phocos CIS-N-MPPT-LED
12/24V PV solar/battery systems
Charge current: 15A
Max input voltage: 85Voc
Max input power: 250/500W
Low voltage disconnect: yes
Grounding: positive
Charging method: MPPT
Availability: in stock
Minimum order: no limit